FREE USA SHIPPING
ON ORDERS $150+
  • TAR-15 Pistol- Entry- 5.56

TAR-15 Pistol- Entry- 5.56

Product Code:TAR-15 Pistol- Entry 5.56
Availability:2-3 Days
Restricted Shipping:No
  • $699.99

Arms Room Lower Receiver Specs:

* CNC Machined from a 7075 T6 MIL-H-6088 Forging
* Mil-Spec Lower Parts Kit Installed
* Milled Manufacturer Engravings
* Accepts .154" Diameter Trigger & Hammer Pins
* MIL-A-8625F Type III Class 2 Hardcoat Anodized Finish inside and out

Arms Room Upper Receiver Specs:

  • Machined from a Mil-spec 7075 T6 forging
  • Type III Hardcoat Anodized finish
  • M4 feed ramps cut into receiver prior to anodizing to improve long term reliabilty

Rail Assembly Specs:

  • Solid Tube Handguard with Grip Fluting
  • Lightweight
  • Free Float Design 

Barrel Specs:

  • 7.5" Length
  • Pistol Length Gas System
  • Machined from a 4140 CMV Blank
  • Chambered in 5.56 NATO
  • 1/7 Twist Rifling 
  • Muzzle Threaded 1/2x28"
  • Mil-Spec Phosphate Finish
  • Lo-Profile Gas Block
Arms Room AR Pistols
Arms Room AR Pistol Barrel Group *Barrel Steel is Certified MIL-B-11595E Chromoly Vanadium *Raw Barrel Steel is Magnetic Particle Inspected *Barrels are Stressed Relieved *Mil-Spec M4 Barrel Extension with 5.3.1.2MIL-STD-171 Phosphate Finish *Chambered in 5.56x45mm NATO *1/2x28 Thread Pitch *Muzzle Threads Cut Concentric to the Bore *Mil-Spec 303 Stainless Steel Gas Tube *Muzzle Devices are Properly Timed and installed with Mil-Spec Crush Washer
Arms Room AR Pistol Bolt Carrier Group *Mil-Spec 8620 Tool Steel M16 Bolt Carrier with Shrouded Firing Pin *Carrier has 5.3.1.2MIL-STD-171 Phosphate Coating on the Exterior 1.2.2.2MIL-STD-171 Hard Chrome Bore *Mil-Spec Tool Steel Carrier Key *Carrier Key has 5.3.1.2MIL-STD-171 Phosphate Coating on the Exterior 1.2.2.2MIL-STD-171 Hard Chrome Bore *Carrier Key is Installed with Grade 8 Hardware and Staked *Bolt is CNC Machined from Carpenter-158 Steel *Bolt is 5.3.1.2MIL-STD-171 Phosphate Coated Inside and Out *All Bolts are Shot Peened per current Mil-Spec *Tool Steel Extractor is Shot Peened, 5.3.1.2MIL-STD-171 Phosphate Coated and Fitted with a Mil-Spec Black Extractor Spring Insert *Mil-Spec Firing Pin with 1.2.2.2MIL-STD-171 Hard Chrome Finish *Mil-Spec Cam Pin with 5.3.1.2MIL-STD-171 Phosphate Coating *Mil-Spec Firing Pin Retaining Pin with 5.3.1.2MIL-STD-171 Phosphate Coating
Arms Room AR Pistol Lower Parts Kit Group *Semi-Auto Lower Parts Kit with Rounded Hammer *All Components Manufactured to all Applicable Mil-Spec Requirements *Hammer and Trigger Engagement Surfaces are Jeweled and Polished during Manufacturing Process
Arms Room AR Pistol Lower Receiver *CNC Machined from a 7075 T6 MIL-H-6088 Forging *Milled Manufacturer Engravings *Accepts .154" Diameter Hammer and Trigger Pins *MIL-A-8625F Type III Class 2 Hardcoat Anodize Finish Inside and Out
Arms Room AR Pistol M4 Flat Top Upper Receiver *CNC Machined from a 7075 T6 MIL-H-6088 Forging *Extended M4 Feed Ramps Machined before Anodize Coating Applied *Mil-Spec 1913 Picatinny Rail *MIL-A-8625F Type III Class 2 Hardcoat Anodized Finish Inside and Out *Mil-Spec Ejection Port Door Assembly with 5.3.1.2 MIL-STD-171 Phosphate Finish *Mil-Spec Forward Assist Assembly with Tool Steel Pawl and 5.3.1.2MIL-STD-171 Phosphate Coating *Forged Mil-Spec Charging Handle with MIL-A-8625F Type III Class 2 Hardcoat Anodized Finish
Arms Room AR Pistol Receiver Extension *7075 Mil-Spec Receiver Extension (Buffer Tube) *Receiver Extension is MIL-A-8625F Type III Class 2 Hardcoat Anodized Inside and Out *Mil-Spec Latch Plate with 5.3.1.2MIL-STD-171 Phosphate Coating *Mil-Spec 17-7 Stainless Steel Buffer Spring *Pistol Receiver Extension Tube has NO Provision to Receive a Stock

Write a review

Note: HTML is not translated!
    Bad           Good